-
Vendor: Weld MountWeld Mount Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 Quantity [102416]Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 QuantityStuds with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded...
- $26.99
-
$31.99 - $26.99
- Unit price
- per
Save $5.00 -
Vendor: Weld MountWeld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
- $23.99
-
$27.99 - $23.99
- Unit price
- per
Save $4.00 -
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $51.99
-
$64.96 - $51.99
- Unit price
- per
Save $12.97 -
AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull...
- $230.99
-
$311.11 - $230.99
- Unit price
- per
Save $80.12 -
10:1 Gun Plunger for AT-6030 AdhesiveSingle Pack gun plunger for AT-6030 Adhesive
- $11.99
-
$14.91 - $11.99
- Unit price
- per
Save $2.92 -
AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength...
- $230.99
-
$311.11 - $230.99
- Unit price
- per
Save $80.12 -
AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long...
- $65.99
-
$89.96 - $65.99
- Unit price
- per
Save $23.97 -
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $48.99
-
$64.96 - $48.99
- Unit price
- per
Save $15.97 -
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...
- $15.99
-
$20.89 - $15.99
- Unit price
- per
Save $4.90 -
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...
- $16.99
-
$20.89 - $16.99
- Unit price
- per
Save $3.90 -
Vendor: Weld MountWeld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
- $26.99
-
$30.99 - $26.99
- Unit price
- per
Save $4.00 -
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $13.99
-
$17.67 - $13.99
- Unit price
- per
Save $3.68 -
1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter....
- $30.99
-
$34.99 - $30.99
- Unit price
- per
Save $4.00 -
Vendor: Weld MountWeld Mount AT-301 Adhesive Dispensing Gun w/10:1 Plunger f/AT-6030 Adhesive Only [80301]Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives....
- $64.99
-
$85.91 - $64.99
- Unit price
- per
Save $20.92 -
AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull...
- $186.99
-
$248.89 - $186.99
- Unit price
- per
Save $61.90 -
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $39.99
-
$52.51 - $39.99
- Unit price
- per
Save $12.52 -
Vendor: Weld MountWeld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15 [83224]1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
- $27.99
-
$31.99 - $27.99
- Unit price
- per
Save $4.00 -
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $24.99
-
$32.60 - $24.99
- Unit price
- per
Save $7.61 -
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $26.99
-
$39.99 - $26.99
- Unit price
- per
Save $13.00 -
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $24.99
-
$32.60 - $24.99
- Unit price
- per
Save $7.61