-
Vendor: C.E. SmithC.E. Smith Flush Mount Rod Holder - 30 Degree 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner [53672CA]Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of...
- $68.99
-
$107.99 - $68.99
- Unit price
- per
Save $39.00 -
Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 4" L *Comes packaged with nuts and washers.
- $6.99
-
$8.99 - $6.99
- Unit price
- per
Save $2.00 -
Panel Bracket Assembly 5" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center.
- $25.99
-
$36.99 - $25.99
- Unit price
- per
Save $11.00 -
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2'' x 4'' X 24" boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21'' with adjustment out to 13" from frame on each...
- $124.99
-
$129.99 - $124.99
- Unit price
- per
Save $5.00 -
Backing Plate for 70 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod...
- $23.99
-
$29.99 - $23.99
- Unit price
- per
Save $6.00 -
Safety Cables - 5000lb Capacity - PVC Coated - PairSafety Cables ensure towing safety. Simply snap the set of 2 carabineer style hooks in place. Includes over 3' of cable length with the proper weight rating.Features: Capacity: 5000lb PVC Coated Pair WARNING: This product...
- $38.99
-
$56.99 - $38.99
- Unit price
- per
Save $18.00 -
Aluminum Clamp-On Rod Holder - Vertical - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders...
- $119.99
-
- $119.99
- Unit price
- per
-
Drop-in SwivelDrop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless construction. Smooth turning adjustable swivel resistance.Great for: Fast trolling heavy baits Bottom fishing with electric...
- $49.99
-
- $49.99
- Unit price
- per
-
Vendor: C.E. SmithC.E. Smith Flush Mount Rod Holder - 0 Degree 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner [53670CA]Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of...
- $63.99
-
$107.99 - $63.99
- Unit price
- per
Save $44.00 -
5" Adjustable Keel Roller Assembly f/3" Tongue - BlackProduct DescriptionAdjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Features: Fits 3" tongue width 5" black rubber roller Includes pair of 3/8" bolts
- $31.99
-
$44.99 - $31.99
- Unit price
- per
Save $13.00 -
Pontoon Bolster Bracket - 15-3/4" x 2"Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross...
- $17.99
-
$26.99 - $17.99
- Unit price
- per
Save $9.00 -
Ribbed Roller 4 Pack - Gold Replace your ribbed wobble rollers with this thermal-plasticized rubber ribbed roller kit Rollers fit 1-1/8" shaft Kit includes four 5" x 3" ribbed rollers with polypropylene hub, four Delrin bushings for 3/4" shaft, for 1-1/8" washers, four 3/4"...
- $56.99
-
$84.99 - $56.99
- Unit price
- per
Save $28.00 -
Vendor: C.E. SmithC.E. Smith Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" w/Sleeve Hex Key [53772]Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made...
- $149.99
-
- $149.99
- Unit price
- per
-
Vendor: C.E. SmithC.E. Smith 70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed [53678C]70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - BoxedThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat...
- $179.99
-
- $179.99
- Unit price
- per
-
Aluminum Clamp-On Rod Holder - Horizontal - 1.05" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders...
- $119.99
-
- $119.99
- Unit price
- per
-
Heavy Duty Spare Tire Cover27410Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and...
- $15.99
-
$29.99 - $15.99
- Unit price
- per
Save $14.00 -
LED Post Guide Light KitThese tough, long lasting, waterproof and shockproof LED post guide lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. One piece lamps fit easily...
- $21.99
-
$34.99 - $21.99
- Unit price
- per
Save $13.00 -
Vendor: C.E. SmithC.E. Smith 70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner [536710]70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and...
- $99.99
-
- $99.99
- Unit price
- per
-
Roller Bunk Mounting Bracket - 11"Perfect for use under roller bunks when the bunks need to be raised up off the frame. Adjustable 11 ga top swivel bracket allows bunks to tilt to the shape of the hull. Features: 11” tall 1/2” swivel bolt included...
- $14.99
-
$20.99 - $14.99
- Unit price
- per
Save $6.00 -
Flex Keel Pad - Edge Cover Style - 10" x 1-1/2" - BlackThese black poly pads cushion the trailer cross members to protect your boat keel. Edge cover style mounts on the trailing edge of any width cross member or axle.Features: Black poly material...
- $4.99
-
$6.99 - $4.99
- Unit price
- per
Save $2.00