-
Transducer Support Arm The transducer support arm fits over the Vexilar rod holder.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type:...
- $9.95
-
- $9.95
- Unit price
- per
-
Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you...
- $63.99
-
$74.99 - $63.99
- Unit price
- per
Save $11.00 -
60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools...
- $29.99
-
$36.00 - $29.99
- Unit price
- per
Save $6.01 -
6-Pin Female to 8-Pin Male AdapterThis adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive...
- $19.99
-
$24.99 - $19.99
- Unit price
- per
Save $5.00 -
Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers. Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets. It can also increase the turbulence over the face of the transducer causing aeration...
- $28.99
-
$42.99 - $28.99
- Unit price
- per
Save $14.00 -
Save up to $3,000 When you Upgrade Qualifying Raymarine Products UNTIL 07/07/2024 VIEWTransom Mount Mounting Bracket for CPT-60Raymarine's mounting bracket specifically for CPT-60. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 9"L WT: 0.2 lbs UPC: 723193785553
- $24.99
-
- $24.99
- Unit price
- per
-
Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 3"H x 4"W x 8"L WT: 0.65 lbs UPC:...
- $36.99
-
$49.00 - $36.99
- Unit price
- per
Save $12.01 -
Transducer Pigtail, 10-Pin(F), 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x...
- $55.00
-
- $55.00
- Unit price
- per
-
Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.
- $84.99
-
$99.99 - $84.99
- Unit price
- per
Save $15.00 -
12-Pin Pigtail Cable for TZT3Furuno's 12-Pin Pigtail Cable specifically for TZT3.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
- $145.00
-
- $145.00
- Unit price
- per
-
9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter CableY Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch. For use with Side Imaging products only, in conjunction...
- $37.99
-
$43.99 - $37.99
- Unit price
- per
Save $6.00 -
With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to...
- $18.99
-
$21.99 - $18.99
- Unit price
- per
Save $3.00 -
164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x...
- $48.99
-
$68.00 - $48.99
- Unit price
- per
Save $19.01 -
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...
- $32.99
-
$39.00 - $32.99
- Unit price
- per
Save $6.01 -
12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive...
- $29.99
-
$34.99 - $29.99
- Unit price
- per
Save $5.00 -
EC M30 Transducer Extension Cable - 30'30' extension cable for transducers. Current Models: ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7, HELIX 9, HELIX 10, HELIX 12Discontinued Series: 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, 1100 SeriesLength: 30'WARNING: This product can expose you...
- $58.99
-
$74.99 - $58.99
- Unit price
- per
Save $16.00 -
Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51 -
Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51 -
Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51 -
Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Single Chirp Transducers This product may not be returned to the original...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51