3" Blower Flange Mounted - 12VFeatures: 3" ducts 12V 100 percent factory tested

DC 105 CFM Flangemount 3" BlowersJabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it...

4" Flangemount Heavy Duty Blower - 24V - 250 CFMThe powerful flange mount blower is designed for use wherever continuous ventilation is required. A motor life of 5,000 hours is guaranteed for service in the most challenging conditions.Features: Extended life 5,000-hour motor They provide...

Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced...

Turbo 4000 Series II In-Line BlowerPart #: 1747-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced...

Turbo 3000 In-Line Series BlowerPart #: 1731-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design...

DC 150 CFM Flexmount 3" BlowersFeatures: Tough Reinforced Plastic Housing Universal flexmount bracket permits outlet to face any direction Slip-On Inlet and Outlet Ducting Connection Efficient High Volume Air Flow Low Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Regulation 183.410 and...

Heavy Duty Flangemount BlowerHeavy Duty Blowers are designed for applications such as commerical or high use engine room ventilation and extraction where a long life requirement demands heavy duty motors with long brush life. Built to provide the same high outputs as our standard...

Flangemount BlowerDC 250 CFM Flangemount 4" Blower Tough Reinforced Plastic Housing Mounts to any flat surface Slip-on Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A Type Accepted Meets USCG Regulations 183.410 and ISO 8846 MARINE for ignition protection...

Rule In-Line Blower - 4" DuctingPart Number: 240Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher...

Marine Air Blower 280 Flange - 12V3″ flange mounted marine ventilation 12V radial blower with capacity 280 m3 per h, 163 CFM. Inlet 72mm, outlet 72mm.Body in hermoplastic PA6 high durable white Nylon with integrated blower motor. 3,8A fuse.Interchangeable with Jabsco 34739-0010, Johnson Pump...

YELLOWTAIL™ 3" Marine Blower - 12 VDC, 120 CFMSHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments, galleys and heads. Installation of the YELLOWTAIL blower is made easy with extended barbs...

YELLOWTAIL™ 4" Marine Blower - 12 VDC, 215 CFMSHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments, galleys and heads. Installation of the YELLOWTAIL blower is made easy with extended barbs...

MSD SpoutRotating pour-out spout

Air Blower 1000 Inline 165 - 12V7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length.Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance. For...

Air Blower 750 Flange - 24V6″ flange mounted marine ventilation 24V radial blower with capacity 750 m3 per h, 441 CFM. Inlet 150mm, outlet 103mm.Body in hermoplastic PA6 high durable white Nylon with integrated blower motor. 5A fuse.Interchangeable with Johnson Pump 80-47418-02.Features: Weight: 2.7...

In-Line 3" Bilge Blower - 24VFeatures: Connections: - for 75mm (3") ducting Dimensions: - 130mm long, 95mm high, 125mm wide Fuse Size: - 2.5(amp) Output: - 3.8 cu. m/minute Efficient high volume airflow Quiet running Slip-on inlet and outlet ducting connections Made in corrosion-resistant materials Mounts in any...

Flexmount BlowerHigh volume air intake or extraction blowers for engine room, fuel compartment, galley or headsFeatures: Flexmounting for 360° adjustable outlet Slip-on inlet and outlet ducting connection Low current draw Dimensionally stable quiet running Delrin rotors Corrosion resistant materials throughout Complies with USCG 183.410...

Rule In-Line Blower - 3" DuctingPart Number: 140Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule? in-line blowers provide higher...

4" In-Line BlowerInlet/Outlet - 4"CFM - 240 Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads. Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers Five blade, quiet, highly efficient, and reliable...