2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

3/8" Pin Chainplate BentSpecifications: Pin Hole: 3/8" (10 mm) Max. Wire: 3/16" (5 mm) Fastener Holes: (4) 3/8" (10 mm) Length: 10" (254 mm) Width: 1-1/4" (31 mm) Thickness: 1/8" (3 mm) Weight: 6.6 oz. (187 g)

Aluminum Deck Cleat - 4"Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g)

Aluminum Deck Cleat - 5"Length 5" (127 mm), Line Score 1/2" (13 mm), Fasteners (2), #12 FH (6 mm), C/C A 1-1/4" (32 mm), Weght 2 oz. (57 g)

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

Aluminum Deck Cleat - 8"Length 8" (203 mm), Line Score 5/8" (16 mm), Fasteners (2), 5/16" FH (8 mm), C/C A 2" (51 mm), Weght 8.5 oz. (240 g)

Anchor Hanger for Danforth Style AnchorsFeatures: Pulpit Mount Anchor Hanger Works with Danforth Style Fluke Anchors from 8 lbs to 22 lbs with Stock diameters of 1/2" (12mm) to 3/4" (19mm) 316 Highly Polished Stainless Steel Easy clamp on installation to 1" tubing includes...

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

Cam Fairlead - BlackMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Cam Fairlead - RedMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8MThe Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and...

Clamp-On Furling Line Stanchion Lead Block - 1" Ball BearingDelrin™ ball bearing sheave allows for quick and easy furling line adjustment. Stainless steel cage and strap ensure durability. Specifications: Stanchions 1" (25mm) in diameter 1-7/16" (37mm) Sheave Diameter Maximum 1/2" (12mm) line size Safe Working...

Clear Step Lead Block for 1" StanchionsUnique design leads your furling control line outside of your stanchions for a clean lead aft to the cockpit. Stainless cheeks with Delrin(tm) ball bearing sheave ensure low-friction and high strength. Locks in place with a small set...

Double Stanchion Tube - 24"Double lifeline stanchion is 24" tall and accepts up to 5/16" (8mm) diameter coated wire. Works with Schaefer base 36-01. L 24" (610 mm), W 1" (25 mm), T 1/16" (1.5 mm), Weight 1 lb. 3 oz. (539 g)

Double Stanchion Tube - 26"Double lifeline stanchion is 26" tall and accepts up to 5/16" (8mm) diameter coated wire. Works with Schaefer base 36-01. L 26" (660 mm), W 1" (25 mm), T 1/16" (1.5 mm), Weight 1 lb. 6 oz. (624 g)

Exit Plate/Flat for up to 1/2" LineSpecifications: Halyard Size 1/2" (12 mm) Mast Stat Opening 2-1/4"x 13/16" (57 mm x 21 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g) 

Fast Entry Cam Cleat - LargeFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 500 lbs (227kg) Line 1/4" - 5/8" (6mm - 16mm), Requires (2) 1/4"...

Fast Entry Cam Cleat - SmallFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 200 lbs (91kg) Line 1/8" - 5/16" (3mm - 8mm), Requires (2) #8...

Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 300 lbs (135kg) Line 1/4" - 7/16" (6mm - 12mm),...

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'. Eliminates possibility of halyard wrap with furling systems when...