AM/FM Patch Cable for AIS & VHF Antenna SplitterThis 2M (6') patch cable has a BNC connector that plugs into the Vesper Marine AIS VHF Antenna Splitter and a Motorola plug to connect to your AM/FM radio.Features: 1 x Standard BNC connector 1 x...

Antenna Cable for Cortex® V1 & M1Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS.Features: Cable fitted for Cortex® V1 & M1 32' cable Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 6"L WT: 0.8 lbs...

Bulkhead Connector Kit for Cortex H1Adding a station for your Cortex H1 is as easy as mounting the bulkhead connector kit and connecting it to 12-24 VDC.

Cellular Low Loss Cable for Cortex - 5M (16')Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail.

Charging Handset Cradle for Cortex H1P Portable HandsetMount your H1P (portable) handset anywhere on the boat where 12-24vDC can be reached. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the...

**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with...

External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external...

External GPS Antenna with 8" Cable for Cortex M1 & 10M Coax CableExternal GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders...

External smartAIS Alarm & Mute Switch Kit for WatchMate XB-8000The WatchMate XB-8000 smartAIS has the ability to trigger an external alarm that can be mounted anywhere onboard. If the XB-8000 detects a risk situation due to a potential collision, anchor drag, or a MOB...

External Weatherproof Single Speaker for Cortex M1 Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing.Features: 3” 70 Watt Speaker Frequency response...

GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck...

GPS Low Loss Patch 10M (33') Cable for CortexReplacement 10M (33’) coaxial cable for the Cortex GPA762 GPS antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna.

Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable HandsetMount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on...

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

Protective Cover for Vision AIS DisplaysProtective cover designed to fit firmly over the Vision AIS display. It will protect your Vision AIS against harsh sunlight, sea spray, and even light knocks. It is a form-fitting cover molded in a way that will hold its...

Replacement External WiFi Antenna for Cortex M1Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the...

Replacement Power & Data Cable for XB & WatchMate Series - 6'Replacement power cable (2M/6.5') for Vesper XB and WatchMate series AIS transponders, receivers, or displays.

Splitter Patch 2M Cable for Cortex M1 to External VHF2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1.

VHF Patch Cable for AIS & VHF Antenna SplitterThis 2M (6.5') patch cable has PL259 connectors that connect the Vesper Marine AIS VHF Antenna Splitter and your AIS WatchMate or VHF Radio.Features: 2 x PL259 connectors 2M (6.5') long 50 Ω cable This cable...

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your...