-
Tee Fitting with Bleed Nipple for IB & Stern Drive CylindersBleed fitting for all inboard and stern drive cylinders.Specifications: 1/4 NPT to 3/8 COMP FITTING Cylinder Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A
- $27.99
-
$36.72 - $27.99
- Unit price
- per
Save $8.73 -
1/4 NPT to 3/8 T-FittingTypical Application:Fitting used in the back of the previous version of the UP series helms before the boss fittingSpecifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A
- $15.99
-
$20.80 - $15.99
- Unit price
- per
Save $4.81 -
Rudder Position IndicatorAwareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other "close call" situation. Davis' Rudder Position Indicator gives...
- $24.99
-
$34.99 - $24.99
- Unit price
- per
Save $10.00 -
UC94 Mounting HardwareMounting hardware for UC94 Cylinder
- $20.99
-
$27.56 - $20.99
- Unit price
- per
Save $6.57 -
Brake Maintenance KitJust like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again.Kit Includes: (2) Bronze Brake Legs with Brake Pads (1) Cotter Pin (1) Stainless Steel Washer (1) Nylon...
- $88.99
-
$104.00 - $88.99
- Unit price
- per
Save $15.01 -
Stainless Steel Wheel Nut - 1"-14 Shaft ThreadsAttention to detail is the keynote of these Edson Wheel Nuts. Highly polished Investment Cast 316 Stainless has superior strength as well as good looks. Measure your steering shaft thread for the correct size. Features: 1-inch - 14 Shaft...
- $58.97
-
- $58.97
- Unit price
- per
-
Motor Well Boot - 4" Split Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap.5 1/2" diameter
- $7.99
-
$11.00 - $7.99
- Unit price
- per
Save $3.01 -
SS Maneuvering Knob with Black Nylon Insert Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). Designed for 1" x 3/4" oval tubing. Direct replacement for 230323 and 230325.
- $32.99
-
$51.95 - $32.99
- Unit price
- per
Save $18.96 -
Vendor: Uflex USAUflex Straight Helm Fitting 1/4 NPT f/UP Comp Line Autopilot Return Line [CONNECTOR FITT.]Straight Helm Fitting 1/4 NPT for UP Comp Line & Autopilot Return LineFitting for the compensating line in the UP series helms or autopilot return line.Specifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF...
- $16.99
-
$22.20 - $16.99
- Unit price
- per
Save $5.21 -
Brass Plug w/O-Ring for PumpsTypical Application:Compensating line brass plug of the UP series helmsSpecifications: 1/4 NPT PLUG Helm Side = 1/4 NPT
- $2.86
-
- $2.86
- Unit price
- per
-
UC128-SVS Mounting HardwareMounting hardware for UC128-SVS Cylinder
- $49.99
-
$66.12 - $49.99
- Unit price
- per
Save $16.13 -
Lube IILube II allows sticky, hard to move steering rods to be properly and easily lubricated for smooth, easy steering action.The system includes a stainless steel lubricating nut with an oil seal and a grease (zerk) fitting. This lubricator's unique design keeps moisture and...
- $21.99
-
$29.99 - $21.99
- Unit price
- per
Save $8.00 -
Union T-Fitting f/3/8" Tube Compression Hose FittingsUnion T-Fitting for 3/8" TubeTypical Applications: T-Fitting for 3 standard 3/8" compression thread hose fittings Specifications:3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A
- $15.99
-
$21.04 - $15.99
- Unit price
- per
Save $5.05 -
Brass Compression Nut w/Sleeve #61CA-6Typical Application:3/8" Compression Nut with ferrule for cut to length nylon tubingSpecifications: 3/8 COMP NUT Fitting Side = 9/16 - 24 UNEF 2B Hose Side = 3/8 Compression Ferrule
- $2.99
-
$3.42 - $2.99
- Unit price
- per
Save $0.43 -
Powertech Male Connector f/Autopilot to ORF HoseTypical Application:Used when connecting an Autopilot to Powertech System - Autopilot to ORF Hose
- $126.99
-
$169.40 - $126.99
- Unit price
- per
Save $42.41 -
Male Run T-Fitting - 3/8" x 3/8" Tube x 1/4" NPTTypical Application:Used to connect any 1/4 NPT Female port to our hosesSpecifications: 1/4 NPT to 3/8 COMP FITTING Helm side = 1/4 NPT Hose side= 9/16 - 24 UNEF 2A
- $30.99
-
$40.60 - $30.99
- Unit price
- per
Save $9.61 -
Lube IILube II allows sticky, hard to move steering rods to be properly and easily lubricated for smooth, easy steering action.The system includes a stainless steel lubricating nut with an oil seal and a grease (zerk) fitting. This lubricator's unique design keeps moisture and...
- $0.00
-
- $0.00
- Unit price
- per