-
AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull...
- $186.99
-
$248.89 - $186.99
- Unit price
- per
Save $61.90 -
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $39.99
-
$52.51 - $39.99
- Unit price
- per
Save $12.52 -
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $24.99
-
$32.60 - $24.99
- Unit price
- per
Save $7.61 -
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $26.99
-
$39.99 - $26.99
- Unit price
- per
Save $13.00 -
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $13.99
-
$17.67 - $13.99
- Unit price
- per
Save $3.68 -
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is...
- $14.99
-
$18.91 - $14.99
- Unit price
- per
Save $3.92 -
Vendor: Weld MountWeld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83212].75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
- $20.99
-
$24.99 - $20.99
- Unit price
- per
Save $4.00 -
Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping...
- $29.99
-
$37.99 - $29.99
- Unit price
- per
Save $8.00 -
Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste...
- $13.99
-
$18.91 - $13.99
- Unit price
- per
Save $4.92 -
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $17.99
-
$21.40 - $17.99
- Unit price
- per
Save $3.41 -
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $17.99
-
$21.40 - $17.99
- Unit price
- per
Save $3.41 -
AT-85810 Mixing Tips *10-PackIts unique design eliminates any possibility of the cartridge plugging up as the entry is separated. This prevents cross-contamination of the two parts, keeping the cartridge ends clean and clear for multiple uses.AT-858 tip is for use with:AT-880
- $11.99
-
$17.99 - $11.99
- Unit price
- per
Save $6.00 -
Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.
- $64.99
-
$85.91 - $64.99
- Unit price
- per
Save $20.92 -
10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive
- $64.99
-
$102.04 - $64.99
- Unit price
- per
Save $37.05 -
Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for...
- $50.99
-
$78.99 - $50.99
- Unit price
- per
Save $28.00