Levered Chain Stopper f/5/16" or 8mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way....

Maxwell Marine Replacement Windlass StripperFeatures: Applications: Maxwell Liberty 1700 Windlass Chainwheel: 5/16" Includes Assembly Screw

Motor 12V 1000W1000 Watt 12 Volt Series Wound Replacement Windlass MotorFeatures: 1000 Watt 12 Volt Replacement Windlass Motor Designed for Maxwell 800 / 1000 windlasses 4 hole flange motor replaces the 1000 Watt 12 volt P11112 2 hole flange motor Maxwell has made a...

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FOOTSWITCHESMaxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation Quick Guide (pdf)Brochure (pdf)

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation One foot switch supplied standard...

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation UV stabilized plastic Quick Guide...

Pin RollMaxwell Pin Roll spare part

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Pressure Arm Upper 3/8" ChainMaxwell Pressure Arm Liberty 2500 3/8" Chain

Pressure Arm Upper 8mm - 5/16" CWFeatures: Pressure Arm Upper 8mm 5/16" CW

Quick Release ClipWindlass Quick Release Clip

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emergency crank / clutch release handle Features Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass Unique spacer...

RC10 Automatic Rope/Chain Windlass Designed for 3/8" chain and 5/8" rope combination Maximum Pull: 1870lbs. Metric chain size: 10mm Motor Wattage: 1200W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two piece...

RC10 Automatic Rope/Chain Windlass Designed for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbs Metric Chain Size: 8mm Motor Wattage: 1000W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two...

RC12/10 12V WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2") short link chain and 20mm (3/4") three strand or...

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind. The in-line, vertical gearbox...