Free standard shipping on orders over $499
Lynx Smart BMS 1000 Battery Management System for Lithium Smart Batteries
The Lynx Smart BMS is a dedicated Battery Management System (BMS) for the Victron Lithium Battery Smart batteries. These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities. They can be connected in series, parallel, and series/parallel so that a battery bank can be built for system voltages of 12V, 24 V, or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V and up to 102 kWh in a 24 V1) and 48 V1) system.
Out of the various available BMSes, the Lynx Smart BMS is the most feature-rich and complete option and integrates seamlessly into the Lynx Distributor system. This model is a 1000 A (M10) version.
Built-in 1000 A Contactor
The contactor acts as a secondary safety system to protect the battery in case the primary controls (ATC, ATD, and/or DVCC) fail to disable loads and/or chargers when required and is also suitable as a remote controllable main system switch.
Pre-charge Circuit
In addition to the contactor, a built-in pre-charge circuit prevents high inrush currents when connecting a capacitive load such as a MultiPlus/Quattro or other inverter, eliminating the need for external pre-charging.
Monitoring and Control
Monitor and control the BMS via Bluetooth using the VictronConnect App or a GX device such as a Cerbo GX and the VRM Portal. A built-in battery monitor that operates similarly as the other Victron Energy battery monitors, provides data such as state of charge, voltage, current, historical data, status info, and more in real-time and with instant readout even without the need to connect to the BMS, allowing diagnostic at a glance.
DVCC closed Loop Control as Well as ATC/ATD Contacts
Compatible Victron inverters/chargers and solar chargers are automatically controlled via a connected GX device and DVCC. The ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port.
Programmable Relay
The relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed. Alternator ATC contact of the alternator opens first and then with a delay of 2 seconds the contactor. These 2 seconds ensure that the alternator is switched off before the battery is disconnected from the system.
AUX Terminal
The advantage of the onboard auxiliary power supply (1.1 A @ system voltage) is to provide power to specific loads (i.e. a GX device) after the BMS has shut down the loads in the event of a low cell voltage event. If no charge voltage is detected within 5 minutes, the BMS, including the AUX connection switches off.
VE.Can and NMEA 2000 Data Communication
VE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed a marine MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable).
Lynx Distributor Fuse Monitoring
Read out the fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx Distributors and their fuses via VictronConnect or a GX device 1) To reduce the required balancing time, we recommend using as many different batteries in series as possible for the application. 24 V systems are best built using 24 V batteries, and a 48 V system.
This System Contains the Following Components:
Power Specifications:
Connections:
Physical Specifications:
Environmental Specifications:
Standards
Important Note: Timely deliveries are not guaranteed from Courier Companies due to Covid-19 pandemic, delays are possible.
USPS Promotional: Calculated at Checkout Page
BestWay Promotional: $9.99 (2-7 Business Days)
Ground Promotional: $11.99 (1-6 Business Days)
2-Days Promotional: $19.99 (2 Business Days)
Next Business Day Promotional: $49.99 (Next Business Days)
Get hundreds of items for the lowest shipping rates. You will only be charged for single shipment, if you go with our Promotional Best way Shipping option during Checkout.
Shipping will be done by UPS, FedEx or USPS. Courier's standard terms, conditions and policies will be applied. Please refer to courier's website for further details. Tracking info will be emailed to you when your order ships.
Our Promotional 2-Days shipping offers all items in one package. You can order as many items as you want in a single shipment. With this shipping method, our magic shipping algorithms shop several carriers to find the best mode of transportation that will deliver your packages in two days to the 48 contiguous states. That’s a tremendous value!
This rate does not apply on Hazmat and Truck Freight items
If any item has any limit to be shipped by the carrier chosen by the customer during checkout process, Gear Ramp LLC. reserves the rights to send it via any other channel.
Hassle Free customer service is our first priority at Gear Ramp LLC. When purchasing via the Internet we realize is sometimes difficult because you are unable to visualize or interact with the product. Because of this limitation, we offer our customers / fans several return options to insure your shopping experience with us is nothing less than extraordinary.
Guarantees and Warranties:
Gear Ramp LLC. will stand behind all products we sell with regards to manufacturing defects in workmanship and material for 30 days. After 30 days defective products should be returned to the manufacturer for warranty repair. We will always do everything in our power to take care of the problem regardless of when purchased.
Please send all return requests to info@gearramp.com. Please include your order number, the item(s) you wish to return, along with the reason for the return.
Thanks for subscribing!
This email has been registered!