-
Vendor: Weld MountWeld Mount AT-301 Adhesive Dispensing Gun w/10:1 Plunger f/AT-6030 Adhesive Only [80301]Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives....
- $64.99
-
$85.91 - $64.99
- Unit price
- per
Save $20.92 -
Inboard Motor FlushMolded Rubber/Aluminum Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg...
- $16.99
-
$24.25 - $16.99
- Unit price
- per
Save $7.26 -
Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes,...
- $43.99
-
$51.86 - $43.99
- Unit price
- per
Save $7.87 -
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...
- $15.99
-
$20.89 - $15.99
- Unit price
- per
Save $4.90 -
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $39.99
-
$52.51 - $39.99
- Unit price
- per
Save $12.52 -
AT-85810 Mixing Tips *10-PackIts unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Â This prevents cross-contamination of the two parts, keeping the cartridge ends clean and clear for multiple uses.AT-858 tip is for use with:AT-880
- $11.99
-
$17.99 - $11.99
- Unit price
- per
Save $6.00 -
Plastic Suction Cup HandleInjection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes, screws, or tools required. Ideal for cleaning waterlines or boat...
- $24.99
-
$36.95 - $24.99
- Unit price
- per
Save $11.96 -
Add-A-Snap - Black - 4"Â For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...
- $4.99
-
$6.25 - $4.99
- Unit price
- per
Save $1.26 -
Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste...
- $13.99
-
$18.91 - $13.99
- Unit price
- per
Save $4.92 -
Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for...
- $31.99
-
$41.13 - $31.99
- Unit price
- per
Save $9.14 -
2" Tall Stainless Stud w/3/8" x 16 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength...
- $49.99
-
$69.99 - $49.99
- Unit price
- per
Save $20.00 -
Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.
- $64.99
-
$85.91 - $64.99
- Unit price
- per
Save $20.92 -
AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long...
- $65.99
-
$89.96 - $65.99
- Unit price
- per
Save $23.97 -
10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive
- $64.99
-
$102.04 - $64.99
- Unit price
- per
Save $37.05 -
Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location.  C83600 bronze
- $18.99
-
$30.00 - $18.99
- Unit price
- per
Save $11.01 -
Snap Tool Multi-KeyA deck plate with attitude! Handy Universal Stainless Steel Strong Perfect for: Fishing Hiking Climbing Boating Biking Camping Sailing Tailgating RV Brochure (pdf)
- $13.99
-
$17.99 - $13.99
- Unit price
- per
Save $4.00 -
Deluxe Rigging KnifeMade entirely of top quality stainless steel with dura-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable.Deluxe Rigging Kinfe comes with a marlin spike, shackle key, and screwdriver.
- $21.99
-
$29.99 - $21.99
- Unit price
- per
Save $8.00 -
Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Built of durable plastic WARNING: This product can expose you to chemicals which...
- $13.99
-
$17.99 - $13.99
- Unit price
- per
Save $4.00 -
Multi-Tool with Knife Blade - 304 Stainless SteelThis handy Multi-Tool includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file, and saw. Constructed of corrosion resistant stamped 304 stainless steel. A must have for every tool bag! Includes canvas carrying...
- $14.99
-
$20.95 - $14.99
- Unit price
- per
Save $5.96 -
Oetiker Stepless Clamp Kit with PliersStepless™ 150-Piece Clamp Rigging Kit by T-H Marine®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by T-H Marine® will last a...
- $138.99
-
$302.06 - $138.99
- Unit price
- per
Save $163.07