-
Transducer Support Arm The transducer support arm fits over the Vexilar rod holder.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type:...
- $8.99
-
$9.95 - $8.99
- Unit price
- per
Save $0.96 -
Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product can expose you to chemicals which are known to the State of California...
- $46.99
-
$54.99 - $46.99
- Unit price
- per
Save $8.00 -
Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...
- $21.99
-
$24.99 - $21.99
- Unit price
- per
Save $3.00 -
Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft MountMount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide® trolling motors. WARNING: This product can expose you...
- $25.99
-
$29.99 - $25.99
- Unit price
- per
Save $4.00 -
Transducer Adapter Cable - 12-PinKeep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6M (23.6") long.WARNING: This product can expose you to chemicals which are known to the State of California to...
- $21.99
-
$24.99 - $21.99
- Unit price
- per
Save $3.00 -
0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScopeâ„¢ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).
- $25.99
-
$29.99 - $25.99
- Unit price
- per
Save $4.00 -
MB1100The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already supplied, and so does not require the use of a separate pigtail...
- $391.99
-
$400.00 - $391.99
- Unit price
- per
Save $8.01 -
Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51 -
Suction Cup Transducer AdapterUsing your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to...
- $10.99
-
$12.99 - $10.99
- Unit price
- per
Save $2.00 -
Vendor: GarminGarmin 8-Pin Female to Wire Block Adapter f/echoMAP 50s 70s, GPSMAP 4xx, 5xx 7xx, GSD 24 [010-11613-00]8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth...
- $59.99
-
$74.99 - $59.99
- Unit price
- per
Save $15.00 -
10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...
- $29.99
-
$35.00 - $29.99
- Unit price
- per
Save $5.01 -
10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...
- $22.99
-
$29.99 - $22.99
- Unit price
- per
Save $7.00 -
Vendor: AirmarAirmar Furuno 10-Pin Mix Match Cable f/High or Medium Frequency CHIRP Transducers [MMC-10F-HM]Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51 -
Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...
- $107.99
-
$127.50 - $107.99
- Unit price
- per
Save $19.51 -
164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- $37.99
-
$50.00 - $37.99
- Unit price
- per
Save $12.01 -
60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- $28.99
-
$35.00 - $28.99
- Unit price
- per
Save $6.01 -
60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools...
- $29.99
-
$36.00 - $29.99
- Unit price
- per
Save $6.01 -
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...
- $32.99
-
$39.00 - $32.99
- Unit price
- per
Save $6.01 -
60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W...
- $37.99
-
$45.00 - $37.99
- Unit price
- per
Save $7.01 -
117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions:...
- $37.99
-
$45.00 - $37.99
- Unit price
- per
Save $7.01