-
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...
- $13.99
-
$17.67 - $13.99
- Unit price
- per
Save $3.68 -
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is...
- $14.99
-
$18.91 - $14.99
- Unit price
- per
Save $3.92 -
Vendor: Weld MountWeld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83212].75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...
- $20.99
-
$24.99 - $20.99
- Unit price
- per
Save $4.00 -
Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping...
- $29.99
-
$37.99 - $29.99
- Unit price
- per
Save $8.00 -
Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste...
- $13.99
-
$18.91 - $13.99
- Unit price
- per
Save $4.92 -
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $17.99
-
$21.40 - $17.99
- Unit price
- per
Save $3.41 -
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...
- $17.99
-
$21.40 - $17.99
- Unit price
- per
Save $3.41 -
Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool.  (It will stop at the proper step.)  Tie a length of monofilament to the...
- $132.99
-
$213.00 - $132.99
- Unit price
- per
Save $80.01 -
Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location.  C83600 bronze
- $18.99
-
$30.00 - $18.99
- Unit price
- per
Save $11.01 -
Add-A-Snap - White - 4"Â For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.
- $4.99
-
$6.25 - $4.99
- Unit price
- per
Save $1.26 -
Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on...
- $6.99
-
$10.35 - $6.99
- Unit price
- per
Save $3.36 -
Pro Dual Feed Motor Flusher with Rectangular CupsFeatures: Dual Feed Motor Flusher Rectangular Cups Included
- $18.99
-
$32.99 - $18.99
- Unit price
- per
Save $14.00 -
Inboard Motor FlushMolded Rubber/Aluminum Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg...
- $16.99
-
$24.25 - $16.99
- Unit price
- per
Save $7.26 -
Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes,...
- $43.99
-
$51.86 - $43.99
- Unit price
- per
Save $7.87 -
AT-85810 Mixing Tips *10-PackIts unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Â This prevents cross-contamination of the two parts, keeping the cartridge ends clean and clear for multiple uses.AT-858 tip is for use with:AT-880
- $11.99
-
$17.99 - $11.99
- Unit price
- per
Save $6.00 -
Plastic Suction Cup HandleInjection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes, screws, or tools required. Ideal for cleaning waterlines or boat...
- $24.99
-
$36.95 - $24.99
- Unit price
- per
Save $11.96 -
Add-A-Snap - Black - 4"Â For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...
- $4.99
-
$6.25 - $4.99
- Unit price
- per
Save $1.26 -
Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.
- $64.99
-
$85.91 - $64.99
- Unit price
- per
Save $20.92 -
10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive
- $64.99
-
$102.04 - $64.99
- Unit price
- per
Save $37.05 -
Snap Tool Multi-KeyA deck plate with attitude! Handy Universal Stainless Steel Strong Perfect for: Fishing Hiking Climbing Boating Biking Camping Sailing Tailgating RV Brochure (pdf)
- $13.99
-
$17.99 - $13.99
- Unit price
- per
Save $4.00